User Manual

vi
Do not short-circuit batteries
When using a DC load to discharge a battery, do not exceed the battery manufacturer's
specified maximum rate of discharge.
Use correctly sized wires
To connect the load to the power supply, use a wire diameter large enough to handle the
maximum continuous output short-circuit current of the power supply without the wire
overheating.
For continued safe use of the instrument
 Do not place heavy objects on the instrument.
 Do not obstruct cooling air flow to the instrument.
 Do not place a hot soldering iron on the instrument.
 Do not pull the instrument with the power cord, connected probe, or connected test
lead.
 Do not move the instrument when a probe is connected to a circuit being tested.