User Manual

3
5 Rear Panel Functions 20
5.1 Remote Sensing 20
5.2 External Triggering 21
5.3 Current Monitoring (I Monitor) 21
5.3.1 Remote Sensing 21
5.3.2 Current Monitoring (I Monitor) 21
6 Advanced Functions 22
6.1 Short Operation 22
6.2 Short-circuit Analog Function 22
6.3 Transient Operation 22
6.3.1 CC Mode 23
6.3.2 CV, CW, and CR modes 23
6.4 LIST Operation 23
6.4.1 Congure List 24
6.4.2 Run List 24
6.4.3 Disable List Mode 25
6.5 Battery Test Function 25
6.5.1 Test Conguration 25
6.5.2 Enable Battery Test Mode 26
6.5.3 Recall Battery File 26
6.5.4 Start Battery Test 26
6.6 Program Mode 26
6.6.1 Example: Small AC/DC power supply test 26
6.6.2 Start Auto Test File 31
6.6.3 Recall Test File 31
6.7 Measurement of Voltage Rise Time 31
6.7.1 Set initial Voltage and Final Voltage 31
6.8 Ripple Function 32
7 Conguration Functions 33
7.1 VON Function 33
7.2 Menu Operation 33
7.3 System Menu 33
7.4 Menu Options 33
7.5 System Menu (System) 34
7.6 Cong Menu 35
8 System Settings 36
8.1 Run Recall Edit 36
8.2 To recall the settings 36
8.3 To run the OPP test 36
8.4 Key Lock 36
8.5 Restore Factory Default Settings 37
8.5.1 Congure Power-On State 37
8.5.2 Load On Knob 38
8.5.3 Congure Trigger Source 38
8.5.4 Save/Recall Instrument Settings 38
8.5.5 Select Storage Group 39
8.5.6 Save Settings 39
8.5.7 Recall Settings 39
8.5.8 Display Input On Timer 40
8.5.9 Remote Interface Setup 40
8.5.10 RS-232 40
8.5.11 CONFIG Menu 41
8.5.11.1 Von Operation 41