User Manual

Battery Capacity Analyzer User Manual
33
5.2 Restoring the Calibration Data
The calibration data now needs to be restored. This step is recommended even if you plan to complete the calibration
processafterthermwareupdate.
1. Underthesection“CalibrationFile”,clicktheOpenFilebutton.
2. Findthele“…….CalibrationData.txt”createinthepreviousstepsverifythedateandtimethelewascreatedand
 selectit.ThelepathshouldnowshowintheCalibrationFilewindow.
3. Clicktheupgradebuttontostarttheprocess.
4. AwarningmessagewillnowbedisplayclicktheYesbutton.
5. Thisproceeswillbefollowedbyanoticeto“PleaseReinserttheUSBcable”.ThisshouldreadRemoveandreinsert
 theUSBcable.