User Manual

Battery Capacity Analyzer User Manual
29
Tab adapter
4. VerifytheOCV:voltageintheexpectedrange.
5. Pressthebuttontobeginthetest.Thebacklightwillturnoindicatingthetesthasstarted.Afterafewseconds
thebacklightwillilluminateandtheresultswillbedisplayed.
The603Bwilldisplaythe“OCV:”and“LCV:”.Themeasurementswillalsowillbestoredintherecord.
CHARGER TEST
OCV : 12. 71
LCV : REC: 001
Press TEST or CANCEL
Charger screen
OCV: 12.72
LCV: 12.65
WEI : Y
SOT: D
CHARGER TEST
OCV : 12. 71
LCV : 12.65 REC: 001
Press TEST or CANCEL
LCV:Valuesafterthetest
Measurementsstoredintherecord
6. PressthebuttontomovebacktotheRecordviewmode.
7. PressthebuttontoadvancetothenextrecordorpressthebuttontomovebacktotheMainmenu.
2. Disconnectthe603Bfromthebattery.The603Bwillremembertherecordinuseandreturntothisrecordwhen
power is restored ready to test the charge circuit.
3. Connectthe603BcablesandverifythepositiveandnegativeleadsarecorrectandtheReversePolarityLEDisnot
 illuminated.UsetheTabtypeadaptersifrequired.