User Manual

Battery Capacity Analyzer User Manual
13
5. Pressthebuttontobeginthetest.Thebacklightwillturnoindicatingthetesthasstarted.Afterapproximately
 2secondsthebacklightwillilluminateandtheresultswillbedisplayed.
CHARGER QUICK TEST
OCV : 13. 61 Ah : 007
LCV : 13.59
Press TEST or CANCEL
Both“OCV:”and“LCV:”willbemeasuredanddisplayed.IftheLCVvoltageissignicantlybelowtheOCV:thevoltage
chargercircuitcouldhaveaproblem.Contactthecontrolpanel(charger),manufacturerformoreinformation.
Thebacklightwillturnoindicatingthetesthasstarted.
BoththeopenvoltageOCV:andtheloadedvoltageLCV:aredisplayed.IftheLCVdropswillbelowtheOCVvaluethe
charger circuit regulator could be faulty. The results of the test must be interpreted by the technician as each type of
chargercircuitisdierent.Contactthechargercircuitmanufactureformoreinformation.
Tip:InatwobatterysystemusetheAhvalueofonebattery.Example,arealarmcontrolpanelhastwo12V
batteriesconnectedinseriestoprovidetheFACPwith24volts.ThechargercircuitintheFACPisdesignedtocharge
atjustover24volts.The603BwillusethisAhvalueofoneofthebatteriestocalculateandapplyaparcelloadonthe
charger circuit.