User Manual

CHAPTER 7. HARMONIC MEASUREMENT FUNCTION 31
h!
Figure 7.1: Bar graph mode - Harmonics
h!
Figure 7.2: Selecting Specic Harmonics
7.2 List Mode
Enter this mode by pressing the button (if not in the harmonic mode already), then select “LIST” from
the on-screen soft-keys. This list is used for showing the voltage, current, active power, reactive power, phase
and total harmonic distortion (THD) factor of dierent harmonics. Harmonic lists can be displayed as a
complete, odd, or even set. See Figure 7.3. From the “SETUP” menu, the list of harmonics is dened. The 1
st
through the 50
th
, odd, even, or all harmonics to display is congured here.
The list is composed 4 pages. Navigate to each page using the right and left arrow keys. The table columns are
listed in Table 7.2