User Manual

Chapter 5

Meter Display

The 5335B has 3 congurable display formats. Each format also allows for 5 dierent congured sets of

measurement. 1 large and 6 small, 4 large and 6 small, or 12 small measurements may be displayed. See

Figures 5.1, 5.2, 5.3.

5.0.1 Operation steps

1. Press

2. The “View” soft-keys select the display format (1,4,12). Repeated press of the soft-key cycles through the

dierent congurations, up to 5 of them.

3. The “CONFIG” soft-key enters the conguration mode for that set of pages.

4. The “FUNC” soft-key cycles through the sets of measurements available for Power (P), Current (I), and

Voltage (U).

5. To change the measurements shown on a page, use the arrow keys and move the cursor to an on-screen

parameter, and select the desired measurement from the soft-keys on the right of the display.

6. To add or remove a page press the “INSERT PAGE” or “DELETE PAGE” respectively. 1 to 5 pages are

supported.