User Manual

CHAPTER 2. MENU 8
Figure 2.5: COMM Conguration - GPIB
Figure 2.6: COMM Conguration - LAN (DHCP)
2.1.2.4 LAN
The LAN (Ethernet) interface may be congured as either DHCP or static. Use the arrow keys to select the IP
Mode eld. When DHCP is selected, the current IP, subnet, and gateway are shown on screen (Figure 2.6).
When “MANU” is selected (static mode) (Figure 2.7), the screen shows elds for setting the IP, subnet, and
gateway. Using the arrow keys and the rotary knob allows the user to move between elds and digits, and use
the rotary knob to change the value.
2.1.3 System Conguration Menu
From this menu, setting the date, time, brightness, and the state of the beep function is set. Use the arrow keys
to navigate the elds, and the rotary knob to change the value. For the beep function, the soft keys are used to
change the value. When settings are changed, press the key to commit the changes. See Figure 2.8.