User Manual

CHAPTER 1. GENERAL INFORMATION 3
1.3 Rear Panel Summary
Figure 1.2: Rear View
GPIB Connector AC Line
LAN Connector External Current Sensor
USB Connector Voltage Input
RS-232 Connector Current Shunt Input
Synchronization BNC
1.4 Power Line Connection
Input power requirements:
AC Voltage 110V ±10% or 220V ±10%
Frequency 47Hz – 63Hz
1.4.1 Fuse Requirements
An AC input fuse is necessary when powering the instrument. Refer to Table 1.1 for the fuse requirements.
1.4.1.1 Fuse Replacement
1. Disconnect the power cord.