User Manual
Remote Interface 80
18.3 Remote Control via GPIB
Each device connected to GPIB interface must have a unique address. The default value is 18 and values range from 1
to 30. The selected address is stored in non-volatile memory.
Choose Utility → Page 1/2 → Interface → GPIB to enter the following interface.
18.4 Remote Control via LAN
The 4060B Series can communicate with a PC through the LAN interface. Users can view and modify the LAN parameters.
Choose Utility → Page 1/2 → Interface → LAN State to turn on LAN. Then choose LAN Setup to enter the interface
conguration values. If available, DHCP (Dynamic Host Conguration Protocol), can set the appropriate values for
networks that provide a DHCP server.