User Manual
Utility Function 68
13.12 Frequency Counter
The 4060B Series provides a frequency counter which could measure frequencies between 100mHz to 200MHz. The dual
channels can still output normally when the counter is enabled. Press Utility → Counter, to enter the following interface.
Period Mode
Frequency Mode
Figure 13.11 Frequency Counter Interface
State Enable or Disable the counter.
Frequency Measured frequency.
Period Measured period.
PWidth Measured positive width.
NWidth Measured negative width.
RefFreq Set the reference frequency. System will calculate the deviation between the measured frequency
and the reference frequency automatically.
TrigLev Set the trigger level voltage.
Duty Measured duty cycle.
Setup Set the counter conguration.