User Manual
Utility Function 62
Language Set the language by pressing the button to toggle between English and Chinese.
PowerOn Set the power on behavior to load the defaults, or last used settings.
Set to Default Set all the settings to default values.
Beeper Enable or Disable the beep.
ScrnSvr Enable or disable the screen saver and set the time.
System Info View the system information
Firmware Update Update the rmware by the U-disk.
Bandwidth Update Update the bandwidth of the generator.
Done Save the current settings and return to the Utility menu.
13.2 Number Format
Press Utility → System → Number Format, to enter the following interface.
Figure 13.3 Set the Number Format
Point Select either “.” or “,” to represent a decimal point.
Separator Select either a space, comma or no separator to show in large numbers.
Done Save the current settings and return to the System menu.
According to the dierent choices of the decimal point and the separator, the format can have various forms.
13.3 Language Setup
The generator oers two languages (English and Chinese). Press Utility → System → Language, to select the desired
language. This setting is stored in non-volatile memory and will not be inuenced by the Set To Default operation.
13.4 Power On
Choose the 4060B Series’s setting to load when the generator is powered on. Two choices are available: the default
setting and the last settings set when the unit was last powered down. Once selected, the setting will be applied when