User Manual
Storage System 59
12.2.2 Select the character
Users can select the desired character from the virtual soft keyboard by using the knob or Up and Down menus. Or touch
the location of the character on the screen directly. Then choose Select to display the character selected in the lename
area.
12.2.3 Delete the character
Use the left and right arrow keys to move the cursor in the le name. Then choose Delete to delete the corresponding
character.
12.2.4 Save the le.
After nishing inputting lename, press Save. The generator will save the le under the currently selected directory with
the specied lename.
12.2.5 To Recall State File or Data File
To recall the instrument state or arbitrary waveform data, the procedures are as follows:
1. Choose the le type.
Press Store/Recall → File Type, and choose state or data as the storage type.
2. Choose the le to be recalled.
Rotate the knob or click the touch screen to select the le you want to recall.
3. Recall the le.
Choose Recall, press the knob or click the location of the le on the screen, the generator will recall the selected le
and display corresponding prompt message when the le is read successfully.
12.2.6 To Delete File
To delete the instrument state or arbitrary waveform data, the procedures are as follows:
1. Choose the le.
Rotate the knob or click the touch screen to select the le you want to delete.
2. Delete the le.
Choose Delete, the generator will display prompt message ‘Delete the le?’ Then press Accept, the generator will delete
the currently selected le.
12.2.7 To Copy and Paste File
4060B Series supports the internal and external storage to copy les from each other. For example, copy an arbitrary
wave le in the U-disk to the instrument, the procedure is as follows:
1. Choose the le type.
Press Store/Recall → File Type, and choose “Data” as the storage type.
2. Choose the le to be copied.
Rotate the knob to select USB Device (0:) and press the knob to open its directory. Then rotate the knob to select the
le you want to copy and press Page 1/2 → Copy.
3. Paste the le.
Rotate the knob to select Local (C:) and press the knob to open its directory.
Then press Paste.