User Manual

Storage System 58
12.1.4 State File
Store the instrument state in internal or external memory in “*.xml” format. The state le stored includes waveform
parameters and modulation, sweep, burst parameters of two channels and utility parameters.
12.1.5 Data File
The 4060B Series can recall the data les in “*.csv” or “*.dat” format from the external memory and transfer them into
“*.bin” format then store them in the internal memory. When it is done, the generator will enter the arbitrary waveform
interface automatically.
In addition, users can edit arbitrary waveforms with PC software — EasyWave, download them to the internal memory
through remote interface and store them (in “*.bin” format) in the internal memory.
12.2 File Operation
12.2.1 To Save the Instrument State
Users can store the current instrument state in internal and external memories. The storage will save the selected function
(including the basic waveform parameters, modulation parameters and other utility settings used.)
To save the instrument state, the procedures are given as followed:
1. Choose the le type to store.
Press Store/Recall → File Type → State, and choose state as the storage type.
2. Choose the location of the le.
Choose a desired location by rotating the knob or clicking the corresponding location on the touch screen.
3. Name the le.
Press Save, to enter the following interface.
Function Description
Up Cursor upward to select.
Down Cursor downward to select.
Select Select the current character.
Delete Delete the current character.
Save Store the le with the current name.
Cancel Return to the store/Recall interface.
Figure 12.4 Filename Input Interface