User Manual
Storage System
12.1 To Store and Recall
4060B Series can store the current instrument state and user-dened arbitrary waveform data in internal or external
memory and recall them when needed.
Press Store/Recall to enter the interface shown in Figures 12.1, 12.2.
Function Description
File Type State The setting of the generator;
Data Arbitrary waveform le
Browse View the current directory.
Save Save the waveform to the specied path.
Recall Recall the waveform or setting information in the specic position of the memory.
Delete Delete the selected le.
Page 1/2 Enter the next page.
Figure 12.1 Store/Recall Interface (Page 1/2)
The 4060B Series provides an internal non-volatile memory (C Disk) and a USB Host interface for external memory.
1. Local (C:)
Users can store instrument states and arbitrary waveform les to C Disk.
12.1.1 USB Device (0:)
There is a USB Host interface located on the left side of the front panel which permits users to store/recall waveforms
or update the rmware version by U-Disk. When the generator detects a USB storage device, the screen will show the
drive letter “USB Device (0:)” and display a prompt message “USB device connected.”, as shown in Figure 12.3. After
removing the U-Disk, the screen will display a prompt message “USB device removed.” And “USB Device (0:)” in the
storage menu will disappear.
Note: The 4060B Series can only identify les of which lenames consist of English letters, number and underscore.
If other characters are used, the name may be displayed in the store and recall interface abnormally.