User Manual

Arbitrary Wave 38
8.4 Selecting a Built-in Waveform
Choose Waveforms →Page 1/2 →Arb →Arb Type →Built-In to enter the following interface, as shown in Figure 8.4.
See Chapter 20 for the set of available built-in waveforms.
Figure 8.4 Built-in Arbitrary Waveforms
Press Common, Math, Engine, Window, Trigo or other menus to switch to the desired category (the selected category in
the menu bar is highlighted), then rotate the knob or click the touch screen to choose the desired waveform (the selected
waveform is highlighted). Select Accept or press the knob to recall the corresponding waveform.
8.5 Stored Waveform
Choose Waveforms →Page 1/2 →Arb →Arb Type →Stored Waveforms to enter the following interface, as shown in
Figures 8.5, 8.6.
Figure 8.5 Stored Waveform Display Interface
Rotate the knob or touch the screen to choose the desired waveform. Then select Recall or press the knob to recall the
corresponding waveform.