User Manual

Noise Wave 34
Figure 6.5 Setting the Bandwidth
1. Press Waveforms → Noise → BandSet and choose “On” to set the bandwidth.
The bandwidth shown on the screen when the instrument is powered on is the default value or the set value of last
power on. When changing the function, if the current value is valid for the new waveform, it will be used sequentially.
2. Input the desired bandwidth.
Use the numeric keyboard to input the parameter value directly, and press the corresponding key to select the parameter
unit. Or you can use the arrow keys to select the digit you want to edit, and then use the knob to change its value.