User Manual

Noise Wave
Press Waveforms key to select the waveform function, and press the Noise softkey. The noise parameters are set by using
the noise operation menu.
The parameters for noise include stdev, mean and bandwidth. As shown in Figure 6.1, in the soft key menu, select
Stdev, The stdev parameter area is highlighted in the parameter display window, and users can set the stdev value here.
Noise is non-periodic signal which has no frequency or period.
Figure 6.1 Noise Parameters Display Interface
BandSet Turn on/o the bandwidth setting.
Stdev Setting the stdev for noise waveform.
Mean Setting the mean for noise waveform.
Bandwidth Setting the bandwidth for noise waveform.
6.1 Standard Deviation
Figure 6.2 Setting the Stdev
1. Press Waveforms → Noise → Stdev, to set the stdev. The stdev shown on the screen when the instrument is powered
on is the default value or the set value of last power down.