User Manual

Quick Start
1.1 Front Panel
4060B Series front panel includes a touch screen, menu softkeys, numeric keyboard, knob, function keys, arrow keys, and
channel control area as shown in Figure 1.1.
Item Description
1 Power Switch
2 USB Port (load waveforms, store settings, etc...)
3 Touchscreen
4 Soft Keys
5 Number Pad
6 Function and Channel Keys
7 Knob and Selection Button
8 Arrow Keys
9 Channel Outputs
Figure 1.1 Front Panel View
1.2 Rear Panel
The rear panel shown in Figure 1.2 provides multiple interfaces, including Counter, 10MHz In/Out, Aux In/Out, LAN,
USB Device, Earth Terminal and AC Power Supply Input.
1.3 Touch Screen Display
The screen displays the parameters and a the waveform for a single channel. Most of the elds can be accessed either
through the function keys below the screen or by pressing their value on screen. Figure 1.3 shows a view of Channel
1 with a simple waveform (sine wave). The values and parameters available on-screen change depending on the mode,
options and waveform selected.
1.4 Waveform Selection and Setup
Press the “Waveform” button to open the waveform setup menu shown in Figure 1.4. The softkeys show the available
waveforms for that page. The “Page 1/2” button accesses the other page of waveforms shown in the second image in
Figure 1.4.