User Manual

12
Offset/LowLevel
Configures the DC offset or the low level of the waveform.
Phase
Configures the phase relative to the other channel.
DutyCycle
Configures the duty cycle of the waveform.
Ramp
Frequency/Period
Configures the frequency or period of the waveform.
Amplitude/HighLevel
Configures the amplitude or the high level of the
waveform.
Offset/LowLevel
Configures the DC offset or the low level of the waveform.
Phase
Configures the phase relative to the other channel.
Symmetry
Configures the symmetry of the waveform.
Pulse
Frequency/Period
Configures the frequency or period of the waveform.
Amplitude/HighLevel
Configures the amplitude or the high level of the
waveform.
Offset/LowLevel
Configures the DC offset or the low level of the waveform.
PulWidth/DutyCycle
Configures the pulse width or the duty cycle of the pulse.
Rise/Fall
Configures the rise or fall time of the pulse.
Delay
Configures the delay of the pulse waveform.
Noise
Stdev
Configures the standard deviation of the noise waveform.
Mean
Configures the mean value of the noise waveform.
DC
DC Offset
Configures the DC offset of the DC waveform.
Arb
Frequency/Period
Configures the frequency or period of the waveform.
Amplitude/HighLevel
Configures the amplitude or the high level of the
waveform.
Offset/LowLevel
Configures the DC offset or the low level of the waveform.
Phase
Configures the phase relative to the other channel.
Arb Type
Access selectable built-in arbitrary waveforms and user-
defined arbitrary waveform stored in the generator.
Mod
Type
Configures the type of modulation. Configures parameters
for AM, FM, PM, ASK, FSK, DSB-AM, or PWM modulation.