User Manual

Gated

In gated mode, the generator controls the waveform output according to the gated signal level.

When the gated signal is ON, the generator outputs a continuous waveform. When the gated

signal is OFF, the generator first completes the output of the current period and then stops.

Waveforms that support gated burst include sine, square, ramp, pulse, noise and arbitrary.

Item

Description

Polarity

Positive

Set the polarity for the gated signal.

Negative

Start Phase

Set the start phase of the burst.

Burst Period

Set the burst Period.

Source

Internal

Choose internal source as a trigger.

External

Choose external source as a trigger. Use

the [Aux In/Out] connector at the rear

panel.

Figure 43 – NCycle Burst Manual Trigger

Table 19 - Gated Burst

This trigger softkey becomes available when

the manual trigger is selected.