User Manual

68
8. When finished, a message will prompt you to restart the generator. At this point,
power off the instrument and wait a few seconds, then power it back on.
9. The instrument will now have the updated firmware. You can verify this by checking
the instrument information (follow instructions from the previous section to check).
3.10 Help System
A built-in help system is available to provide quick references on setting up common output
configurations with the generator. To access the system, press the Help button from the
front panel. The screen below will be displayed:
You can use the menu keys, the rotary knob, or the up and down buttons to select
any of the ten items listed in the help system as shown above. Once selected (the cursor
highlights the selection in blue), push the corresponding menu function key for the Select
option and the screen will display a description of the selected help item.
When finished, press the Cancel option from the menu to go back to the main help menu.