Datasheet

Dual Channel Function/Arbitrary Waveform Generators
4050 Series
5 www.bkprecision.com
v052518
Model 4052, 4053, 4054 & 4055
Pulse
Pulse Width 16 ns minimum, 8 ns resolution
Rise/Fall Time 7 ns (typical) at 1 kHz, 1 Vpp from 10% to 90%
Duty Cycle 0.1% resolution
Overshoot < 5%
Jitter (pk-pk) 8 ns
Burst
Waveform Sine, square, ramp, pulse, arbitrary (except DC)
Type Cycle (1 – 50,000 cycles), infinite, gated
Start/Stop Phase 0 ° to 360 °
Internal Period 1 μs to 500 s
Gated Source External trigger
Trigger Source Internal, external, manual
Phase Offset
Range 0 ° to 360 °
Resolution 0.1 °
Trigger Characteristics
Trigger Input
Max. Input Voltage ± 6 V
Input Level TTL compatible
Slope Rising or falling, selectable
Pulse Width > 100 ns
Input Impedance > 5 kΩ, DC coupling
Maximum Frequency 1 MHz
Input Latency < 300 ns
Trigger Output
Voltage Level TTL compatible
Pulse Width > 400 ns
Output Impedance 50 Ω
Maximum Frequency 1 MHz
AM, FM & PM Modulation Characteristics
Carrier Sine, square, ramp, arbitrary (except DC)
Source Internal, external
Modulation Waveform Sine, square, ramp, noise, arbitrary (2 mHz to 20 kHz)
AM Modulation Depth 0% to 120%, 0.1% resolution
FM Frequency Deviation 0 to 0.5*bandwidth, 10 μHz resolution
PM Phase Deviation 0 to 360 °, 0.1 ° resolution
ASK & FSK Modulation Characteristics
Carrier Sine, square, ramp, arbitrary (except DC)
Source Internal, external
Modulation Waveform 50% duty cycle square waveform (2 mHz – 50 kHz)
DSB-AM Modulation Characteristics
Carrier Carrier sine, square, ramp, arbitrary (except DC)
Source Source internal, external
Modulation Waveform Sine, square, ramp, noise, arbitrary (2 mHz – 1 kHz)
PWM Modulation Characteristics
Frequency 500 μHz – 20 kHz
Source Internal, external
Modulation Waveform Sine, square, ramp, arbitrary (except DC)
External Modulation - 6 V to 6 V (max. width deviation)
Duty Cycle Modulating Frequency 2 mHz to 20 kHz
Sweep Characteristics
Waveforms Sine, square, ramp, arbitrary (except DC)
Sweep Shape Linear or logarithmic, up or down
Sweep Time 1 ms to 500 s
Sweep Trigger Internal, external, manual
Inputs
Modulation In
± 6 Vpp for 100% modulation
> 5 kΩ input impedance
maximum voltage input: ± 6 V
Ext Trig/Gate/FSK/Burst
TTL compatible
maximum voltage input: ± 6 V
External Clock
10 MHz ± 100 Hz, TTL compatible for synchronization to
external 10 MHz clock or another generator
Frequency Counter
Measurement
Frequency, Period, Positive/Negative pulse width, Duty cycle
Measurement Range
(typical)
Single channel: 100 mHz to 200 MHz
Pulse width/duty cycle: 1 Hz to 10 MHz
Frequency Resolution 6 bits
Input Range
DC and AC Coupling
(typical)
DC offset range: ± 1.5 VDC
450 mV to ± 2.5 V, (100 mHz to 10 MHz)
2.5 V to 5 V, (10 MHz to 50 MHz)
4.5 V to 5 V, (50 MHz to 200 MHz)
Pulse Width/Duty Cycle
Voltage Range
50 mVrms to 5 Vpp
Input Impedance 1 MΩ
Coupling AC, DC
Trigger Level Range (typical) -3 V to 1.8 V
Environmental and Safety
Temperature
Operating: 32 ºF to 104 ºF (0 °C to 40 °C)
Storage: -4 ºF to 140 ºF (-20 °C to 60 °C)
Humidity
< 95º F (35 °C), ≤ 90 % RH
95 ºF to 104 ºF (35 °C to 40 °C), ≤ 60 % RH
Altitude
Operating: below 9,842 ft (3,000 m)
Storage: below 49,212 ft (15,000 m)
Electromagnetic
Compatibility
EMC Directive 2004/108/EC, EN61326:2006,
EN61000-3-2:2006+A2:2009, EN61000-3-3:2008
Safety
Low voltage directive 2006/95/EC, EN61010-1:2001,
EN61010-031:2002+A1:2008
General
Display Display 3.5” TFT-LCD display, 320 x 240
Interfaces USBTMC (standard), GPIB (optional), USB host port
Storage Memory 10 instrument settings, 10 arbitrary waveforms
Power
100 to 240 VAC ± 10%, 50 / 60 Hz ± 5%
100 to 120 VAC ± 10%, 45 to 440 Hz
Power Consumption 50 W max.
Dimensions (W x H x D) 8.4” x 3.5” x 11.1” (213 x 89 x 281 mm)
Weight 5.7 lbs (2.6 kg)
Warranty Three Years
Standard Accessories
Getting Started manual, full instruction manual on CD, AC power
cord, USB type A-to-type B cable, certificate of calibration
Optional Accessories USB-to-GPIB adapter (model AK40G)