Datasheet

www.bkprecision.com
Dual Channel Function/Arbitrary Waveform Generators
4
050 Series
4
Model 4052 4053 4054 4055
Channels 2
F
requency Characteristics
Sine 1 µHz – 5 MHz 1 µHz – 10 MHz 1 µHz – 25 MHz 1 µHz – 50 MHz
Square 1 µHz – 5 MHz 1 µHz – 10 MHz 1 µHz – 25 MHz
Triangle, Ramp 1 µHz – 300 kHz
Pulse 500 µHz – 5 MHz
Gaussian Noise (-3 dB) > 5 MHz > 10 MHz > 25 MHz > 50 MHz
Arbitrary 1 µHz – 5 MHz
Accuracy
± 50 ppm (90 days)
± 100 ppm (1 year)
Resolution 1 µHz
A
rbitrary Characteristics
Built-in Waveforms 48 built-in waveforms (includes DC)
Waveform Length 16,000 points / Ch
Vertical Resolution 14 bits
Sampling Rate 125 MSa/s
Minimum Rise/Fall Time 7 ns (typical)
Jitter (pk-pk) 8 ns (typical)
Non-volatile Memory Storage 10 waveforms
O
utput Characteristics
Amplitude Range
channel 1: 2 mVpp – 10 Vpp into 50 Ω (4 mVpp – 20 Vpp into open circuit), ≤ 10 MHz
2 mVpp – 5 Vpp into 50 Ω (4 mVpp – 10 Vpp into open circuit), > 10 MHz
channel 2: 2 mVpp – 3 Vpp into 50 Ω (4 mVpp – 6 Vpp into open circuit)
Amplitude Resolution up to 4 digits
Amplitude Accuracy (100 kHz) ± (0.3 dB + 1 mVpp of setting value)
Amplitude Flatness
(relative to 100 kHz, 5 Vpp)
± 0.3 dB
Cross Talk < -70 dBc
Offset Range (DC)
channel 1: ± 5 V into 50 Ω (± 10 V into open circuit)
channel 2: ± 1.5 V into 50 Ω (± 3 V into open circuit)
Offset Resolution up to 4 digits
Offset Accuracy ± ( |offset setting value| x 1% + 3 mV)
Channel Output Impedance
50 Ω, high impedance
Output Protection short-circuit protection
Sync Out
TTL compatible, 2 MHz maximum frequency
> 50 ns width, not adjustable
50 Ω (typical) output impedance
Waveform Characteristics
Harmonic Distortion
DC – 1 MHz, < - 60 dBc
1 MHz – 5 MHz, < -53 dBc
5 MHz – 25 MHz, < - 35 dBc
25 MHz – 50 MHz, < -32 dBc
Total Harmonic Distortion DC – 20 kHz at 1 Vpp, < 0.2 %
Spurious (non-harmonic)
DC – 1 MHz, < -70 dBc
1 MHz – 10 MHz, < -70 dBc + 6 dB/spectrum phase
Phase Noise 10 kHz offset, - 108 dBc/Hz (typical)
Rise/Fall Time (square)
< 12 ns (10 % – 90 %) at full amplitude into 50 Ω
Variable Duty Cycle (square)
20% – 80% to 10 MHz
40% – 60% to 20 MHz
50% > 20 MHz
Asymmetry (50% duty cycle) 1% of period + 20 ns (typical,1 kHz, 1 Vpp))
Jitter (square) 0.1% of period (typical, 1 kHz, 1 Vpp)
Ramp Symmetry 0% – 100%
Linearity (triangle, ramp at 1 kHz,
1 Vpp, 100% symmetry)
< 0.1% of peak output (typical)
Specifications