User Manual

Sine Menu

F1: Frequency – Selects and displays the frequency.

Change the frequency setting using the cursor keys,

rotary knob, or numerical keys.

F2: Amplitude – Selects and displays the amplitude.

Change the amplitude setting using the cursor keys,

rotary knob, or numerical keys.

F3: Offset – Selects and displays the offset parameter.

Change the offset by using the cursor keys, rotary knob,

or numerical keys. If a certain setting cannot be

produced, the waveform generator will display a “Setting

Conflict” message.

Amplitude and offset settings interact and are bound by

hardware restrictions. To obtain the desired waveform,

the amplitude and offset must satisfy the following

formula: