User Manual
25
1
To select the sweep mode, press SWEEP, then press the
function key that corresponds to the desired Sweep
menu option, as shown:
Sweep Menu
F1: ON/OFF – Enables/disables the sweep function.
Select between Sweep ON or OFF.
F2: LIN – Selects the Linear sweep shape.
F3: LOG – Selects the Logarithmic sweep shape.
F4: SET – Defines the Sweep Start and Stop
frequencies.
Set Sweep Menu
3.7 ON Key
Use this key to control the main output signal. When the
output is active, the key will lit. By default, this will be ON
(enabled) from a power-up. This can be changed by
changing the OUT-ON settings from the utility menu.