User Manual

24
3.6.2 UTILITY Key
Utility Menu
F1: RECALL – Recalls a previously stored front-panel
setup from the selected buffer. Change the buffer number
by using the rotary input knob. Valid storage buffer
numbers are from 1 to 9.
Buffer 0 is the factory default setup.
F2:STORE – Stores the current front-panel setup to the
specified storage buffer. Change the buffer number by
using the data keys or the rotary input knob. Valid
storage buffer numbers range from 1 to 9.
F3: OUT-ON – Selects the OUTPUT state from a power-
up. Select ON to enable or OFF to disable the output
from a power-up.
F4: INTENSITY – Adjusts the intensity of the LCD
screen. Valid range is 1 – 9; 9 giving the highest
intensity and contrast.
3.6.3 SWEEP Key
Selects the Sweep Mode and allows entering sweep
parameters Sweep Start, Sweep Stop and Sweep Rate.