User Manual

22
3.6.1 WAVEFORM Keys
The keys select the waveform output and displays the
waveform parameter menu (frequency, amplitude and
offset).
Sine Menu
F1: FREQ (Frequency) Selects and displays the
frequency. Change the frequency setting using the cursor
keys, rotary knob or numerical keys.
F2: AMPL (Amplitude) Selects and displays the
Amplitude. Change the amplitude setting using the
cursor keys, rotary knob or numerical keys.
F3:OFST (Offset) Selects and displays the Offset
parameter. Change the offset by using the cursor keys,
rotary dial or numerical keys. If a certain setting cannot
be produced, the waveform generator will display a
Setting Conflict” message.
Amplitude and Offset Interaction:
Amplitude and offset settings interact and are bound by
hardware restrictions. In order to obtain the desired
waveform, the following amplitude and offset hardware
limitations must be considered: