User Manual

Figure 50 Comparator Display Percent Error

 ABS (Absolute): The user can set absolute HIGH and LOW limits. The instrument will

compare the measured value to the absolute limits and determine if the DUT is HI

(above the upper limit), LO (below the lower limit), or IN (within limits).

3.3 Bin Display

The Bin Display (BIN DISP) page places the resistance measurement in up to 10 user-defined

bins. See 0 for instructions to define bins. The bin operation is executed when the instrument is

triggered. To access the page press the DISP button and select BIN DISP in menu options.

Figure 51 - Bin Display

When the measurement is outside of a bin’s tolerance, it is defined as NOT GOOD (NG). When

the measurement is inside of a bin’s tolerance, it is defined as GOOD (GD).