User Manual

125
7 Remote Control
The instrument has RS232, USB (virtual COM), and LAN interfaces for remote control. This
chapter will describe how users can remotely operate the instrument and use SCPI (Standard
Commands for Programmable Instruments) commands via these interfaces. 4.3.5 Bus Mode
must be in the respective interface mode in order to communicate.
7.1 RS232C
For RS232C connectivity, refer to the diagram below for the pinout information. The RS232C is
labeled in the rear panel and is a female DB-9 interface. Use a null modem or crossover cable
where pins 2 and 3 are reversed.
PIN
Description
1
-
2
Transmit Data
3
Receive Data
4
-
5
GND
6
-
7
-
8
-
9
-