User Manual

110
The following parameters are accessible from the Bin Setup page:
4.3.1 OPTIONS
The OPTIONS key allows the user to access the additional bin setup options menu.
The options are:
 BIN MODE: Toggle between % (percentage error) and ABS (Absolute limits).
 BIN BEEP: Toggle between three bin beep modes: OFF, NG and GD.
 BIN CLEAR: Clear all setting parameters for all bins.
 BIN OUT: Toggle between BCD (binary output) and BIN (bin compare result output)
modes that format the handler interface output.
4.3.2 BIN NO.
Press BIN NO. to display PgUp and PgDn keys and navigate between bins 0 to 9.
4.3.3 BIN 0 to 9
Press the bin number 0 to 9 and display the DEL option. Press DEL to delete bin settings and set
the state to OFF.
4.3.4 STATE
Press STATE to display the bin state as ON or OFF. When ON is set, the corresponding bin in the
display zone will be shown as lighted circle. When OFF is set, the corresponding bin is shown as
a horizontal line (  ).
4.3.5 BIN MODE
The bin calculation is determined by the BIN MODE. Press the limit or value field to open a
numeric keypad.
If BIN MODE: ABS is selected:
 HIGH: Input the high limit for DUT comparison.
 LOW: Input the low limit for DUT comparison.
If BIN MODE: % is selected:
OPTIONS
•BIN MODE
•BIN BEEP
•BIN CLEAR
•BIN OUT
BIN NO.
• PgUp
• PgDn
0 to 9
•DEL
STATE
•OFF
•ON