User Manual

CHAPTER 10. STATISTICS 27
10.7 STATistics:CLEAr
Description Command for clearing statistical data.
Note If statistics is active (STATistics[:STATe] on) this command is ignored and
the value le unchanged. Disable statistics to issue this command.
Command Syntax STATistics:CLEAr
Parameters none
Example stat:clear
10.8 STATistics:NUMBer
Description The number of statistical samples and how many of them are within the
comparison seings.
Note Information incomplete.
ery Syntax STATistics:NUMBer?
Returned Parameters <nr1>,<nr1> total sample count, In range sample count
10.9 STATistics:MEAN
Description The mean sample value.
ery Syntax STATistics:MEAN?
Returned Parameters <nr3>
10.10 STATistics:MAXimum
Description The maximum sample value and sample number
Note If the statistical values are invalid, no samples taken for example, the re-
turn value is 9.90000E+37,0.
ery Syntax STATistics:MAXimum?
Returned Parameters <nr3>,<nr1> Max value, Sample number of max value
10.11 STATistics:MINimum
Description The minimum sample value and sample number
Note If the statistical values are invalid, no samples taken for example, the re-
turn value is 9.90000E+37,0.
ery Syntax STATistics:MINimum?
Returned Parameters <nr3>,<nr1> Min value, Sample number of min value