User Manual
Chapter 9
BIN
9.1 BIN[:STATe]
Description Seing of the BIN comparator function.
Command Syntax BIN[:STATe] <bool>
Parameters 1, on, 0 or o
Example bin on
ery Syntax BIN[:STATe]?
Returned Parameters 1 or 0 for on and o respectively
9.2 BIN:BEEPer
Description The beep mode when in BIN mode. Beeping on passing (gd) or failing (ng)
is set via this command.
Command Syntax BIN:BEEPer <str>
Parameters OFF Beep does not sound
NG Beep sounds when measuring values outside of the BIN limits.
GD Beep sounds when a measured value is within BIN limits.
Example bin:beeper gd
ery Syntax BIN:BEEPer?
Returned Parameters OFF, GD or NG
9.3 BIN:MODE
Description Configure BIN mode to use absolute (ATOLerance) ranges of values based
on direct entry or by a percent deviation (PTOLerance) from the nominal
values configured.
Command Syntax BIN:MODE <str>
Parameters ATOLerance Absolute value ranges
20