User Manual

CHAPTER 8. COMPARATOR 19
8.7 COMParator:PERCent
Description The percentage threshold for the comparator. The percentage is relative
to the “reference” value set, NOM on screen in comparator mode.
Command Syntax COMParator:PERCent <nr2>
Parameters 0 to 99.999 units: %
Example comp:per 10%
ery Syntax COMParator:PERCent?
Returned Parameters <nr2>
8.8 COMParator:RESult
Description ery the current comparator result.
Note ERR happens when there is a measurement error and the comparator
function is enabled.
ery Syntax COMParator:RESult?
Returned Parameters <str>
HI, IN, LO, OFF, or ERR
8.9 COMParator:COUNter[:STATe]
Description Supposed to enable, disable and return the state of the counter function.
Not working with current firmware. Leaving command as a placeholder.
Command Syntax COMParator:COUNter[:STATe] <bool>
Parameters 1, on, 0 or o
Example comparator:counter on
ery Syntax COMParator:COUNter[:STATe]?
Returned Parameters <nr1> 1 or 0
8.10 COMParator:CLEAr
Description Supposed to clear the counter in comparator mode. Not working with
current firmware. Leaving command as a placeholder.
Command Syntax COMParator:CLEAr
Parameters n/a
Example comp:clear