User Manual

CHAPTER 3. FUNCTION 8
3.10 FUNCtion:FDETect:AUTO
Description Automatic fault detection
Note 2841 Only
Command Syntax FUNCtion:FDETect:AUTO <bool>
Parameters 1, on, 0, or o
Example func:fdet:auto on
ery Syntax FUNCtion:FDETect:AUTO?
Returned Parameters <nr1> 1 or 0 for on and o
3.11 FUNCtion:CALibration:MODE
Description Calibration mode
Note 2841 Only
Command Syntax FUNCtion:CALibration:MODE <str>
Parameters AUTO or MANUAL
Example func:cal:mode auto
ery Syntax FUNCtion:CALibration:MODE?
Returned Parameters <str>
3.12 FUNCtion:OVC
Description Instrument oset voltage compensation state.
Note 2841 Only
Command Syntax FUNCtion:OVC <nr1>
Parameters 0 or 1
Example func:ovc 1
ery Syntax FUNCtion:OVC?
Returned Parameters 0 or 1 for o and on respectively