User Manual

CHAPTER 3. FUNCTION 6
3.3 FUNCtion:IMPedance:RES:RANGe:AUTO
Description Automatic ranging mode for the resistance measurement.
Command Syntax FUNCtion:IMPedance:RES:RANGe:AUTO <Bool>
Parameters ON, 1, OFF, or 0 (not case sensitive)
Example func:imp:res:range:auto on
ery Syntax FUNCtion:IMPedance:RES:RANGe?
Returned Parameters 1 for on, and 0 for o
3.4 FUNCtion:IMPedance:LPR:RANGe
Description The resistance range in Low Power Resistance measurement mode.
Command Syntax FUNCtion:IMPedance:LPR:RANGe <nrf>
Parameters 2000.00E–3, 20.0000E+0, 200.000E+0, 2000.00E+0
Example func:imp:lpr:range 2
ery Syntax FUNCtion:IMPedance:LPR:RANGe?
Returned Parameters <nrf>
3.5 FUNCtion:IMPedance:LPR:RANGe:AUTO
Description Automatic ranging mode for the low power mode resistance measure-
ment.
Command Syntax FUNCtion:IMPedance:LPR:RANGe:AUTO <Bool>
Parameters ON, 1, OFF, or 0 (not case sensitive)
Example func:imp:lpr:range:auto on
ery Syntax FUNCtion:IMPedance:LPR:RANGe?
Returned Parameters 1 for on, and 0 for o
3.6 FUNCtion:CURRent
Description The measurement current range for measuring in the 200mΩ range.
Note 2841 Only
Command Syntax FUNCtion:CURRent <str>
Parameters 1A or 0.1A
Example func:curr 1A
ery Syntax FUNCtion: CURRent?
Returned Parameters <str>