User Manual

97
The following parameters are accessible from the Bin Display.
3.3.1 OPTIONS
The OPTIONS key allows the user to access the additional bin options menu.
The options are:
 DISP (ON/OFF): Toggle the resistance measurement results display on and off
 SAVE DATA: Enabled when a USB flash drive is attached. When activated, resistance and
temperature data is continuously saved to an auto-generated CSV onto the drive. The
key changes to STOP SAVE to terminate the function. SAVE DATA is disabled if no USB
flash drive attached.
Removing the USB flash drive before pressing STOP SAVE will result in the loss of the
recorded data. The CSV is rewritten every time.
3.3.2 BIN
The BIN key turns the bin function and the bin results display on and off. Each bin is replaced
with a horizontal line (  ) when the function is off.
3.3.3 BIN BEEP
This option allows the user to select whether the unit will beep when a bin is determined. The
user can select one of the following options:
 OFF: Turns off the bin beep function.
 NG: When the measurement result is different from the bin setting the beep will sound.
 GD: When the measurement result conforms to the bin setting the beep will sound.
3.3.4 NG COLOR & GD COLOR
The user can select what color will be displayed when the measurement is NG or GD. While the
NG COLOR and GD COLOR settings can be set with the same color, it is recommended to use
different colors to distinguish between a NG and GD measurement.
NG COLOR
OPTIONS
• DISP
• SAVE DATA
BIN
• OFF
• ON
BIN BEEP
• OFF
• NG
• GD
NG COLOR
• OFF
• GRAY
• RED
• GREEN
GD COLOR
• OFF
• GRAY
• RED
• GREEN