User Manual

48
5 FILE MANAGER
The file manager menu is used to save and load parameter configuration files (.STA) set by the
user. These files can be saved to the internal (I) non-volatile memory or externally (E) to a USB
flash drive. Insert an empty USB flash drive to the front panel USB port and wait for the drive to
initialize (about five seconds).
Figure 30 - File Manager
To access the file manager menu:
1. Press the FILE button or select the DATA key that can be found on all display pages,
then select FILE.
2. Press <INTERNAL FILE> or <EXTERNAL FILE> to navigate between screens.
5.1 File Structure
The internal non-volatile memory can stored up to 30 STA files. The following folder structure is
automatically created on a USB flash drive when an external USB flash drive is connected.
Folder
Maximum Amount of File
Description
CSV
1
Measurement results, *.CSV file.
STA
40
Configuration data, *.STA file.
PIC
999
Screen capture, *.gif file.
Table 3 - Folders Generated in USB
5.1.1 Saving Configuration Files
1. Navigate to the FILE MANAGER screen.
2. Select desired destination, INTERNAL FILE or EXTERNAL FILE (if USB is attached).
3. Select a file slot or press Page # to navigate PAGE UP or PAGE DOWN to show the next 4
file slots.