User Manual

46
4.3.3 Language
Press Language to select the displayed language, ENGLISH or CHINESE. The default language is
English.
4.3.4 Password
Press Password to access the following menu options:
 OFF: Touch this key to turn off the password protection function. This function requires
the user to input the current password to de-activate the password protection.
 LOCK SYSTEM: Touch this key to enable the password function. Please input the
password which will be required when opening a file or starting up the instrument.
 LOCK FILE: It is necessary to input the password if this function is enabled.
 MODIFY: Touch this key to modify the password.
Steps for changing the password:
1. Touch MODIFY to open an alphanumeric keypad.
2. Input the original password and press ENTER to confirm.
3. Prompt: “Input password”
4. Input the new password and press ENTER to confirm.
5. Prompt: “New password”
6. Input the new password a second time and press ENTER to confirm.
7. Prompt: “Confirm new password”
8. The <SYSTEM SETUP> page will be displayed and the password modification is complete.
9. Prompt: “Password modify ok”
Note: The default password is 2516.
4.3.5 Bus Mode
Press Bus Mode to select the communication interface in the menu options. All interfaces are
accessible on the rear panel.
 RS232C
 USBTMC
 USBVCOM
4.3.6 Baud Rate
Press Baud Rate to select from the following six baud rates:
 9600