User Manual

43
The following parameters are accessible from the Bin Setup page:
Figure 27 - BIN SETUP Menu Tree
4.2.1 OPTIONS
The OPTIONS key allows the user to access the additional bin setup options menu.
The options are:
 BIN MODE: Toggle between % (percentage error) and ABS (Absolute limits).
 BIN BEEP: Toggle between three bin beep modes: OFF, NG and GD.
 BIN CLEAR: Clear all setting parameters for all bins.
4.2.2 BIN 1 to 3
Press the bin number 1, 2, or 3 to display the DEL option. Press DEL to delete bin settings and
set the state to OFF.
4.2.3 STATE
Press STATE to display the bin state as ON or OFF. When ON is set, the corresponding bin in the
display zone will be shown as lighted circle. When OFF is set, the corresponding bin is shown as
a horizontal line (  ).
4.2.4 BIN MODE
The bin calculation is determined by the BIN MODE. Press the limit or value field to open a
numeric keypad.
If BIN MODE: ABS is selected:
BIN SETUP
OPTIONS
BIN MODE
%
ABS
BIN BEEP
OFF
NG
GD
BIN CLEAR BIN NO.
1
STATE
ON
OFF
NOM or
HIGH
% or
LOW
2 3