User Manual

35
When the measurement is outside of a bin’s tolerance, it is defined as NOT GOOD (NG). When
the measurement is inside of a bin’s tolerances, it is defined as GOOD (GD).
The following parameters are accessible from the Bin Display:
Figure 21 - BIN DISP Menu Tree
3.3.1 OPTIONS
The OPTIONS key allows the user to access the additional bin options menu.
The options are:
 DISP (ON/OFF): Toggle the resistance measurement results display on and off
3.3.2 BIN
The BIN key turns the bin function and the bin results display on and off. Each bin is replaced
with a horizontal line (  ) when the function is off.
3.3.3 BIN BEEP
This option allows the user to select whether the unit will beep when a bin is determined. The
user can select one of the following options:
 OFF: Turns off the bin beep function.
 NG: When the measurement result is different from the bin setting the beep will sound.
 GD: When the measurement result conforms to the bin setting the beep will sound.
BIN DISP
OPTIONS
DISP
BIN
OFF
ON
BIN BEEP
OFF
NG
GD
NG COLOR
OFF
GRAY
RED
GREEN
GD COLOR
OFF
GRAY
RED
GREEN