User Manual

instrument will compare the measured value to the tolerance and determine if the DUT

is HI (above tolerance), LO (below tolerance), or IN (within tolerance). The display will

show ± percent (∆) difference the measurement is from the nominal value.

 ABS (Absolute): The user can set absolute HIGH and LOW limits. The instrument will

compare the measured value to the absolute limits and determine if the DUT is HI

(above the upper limit), LO (below the lower limit), or IN (within limits).

3.3 Bin Display

The Bin Display (BIN DISP) page places the resistance measurement in up to 3 user defined bins.

See 0 for instructions to define the bins. The bin operation is executed when the instrument is

triggered. To access the page press the DISP button and select BIN DISP in menu options.

Figure 20 - Bin Display