User Manual

118
4. Select SAVE. If an existing STA file is select, it will be overwritten.
5. Select YES to continue. Select NO to cancel.
6. An alphanumeric keypad will open. Type in desired file name. Press Enter. Or Esc to
cancel.
5.1.2 Load Configuration Files
1. Navigate to the FILE MANAGER screen.
2. Select desired destination, INTERNAL FILE or EXTERNAL FILE (if USB is attached).
3. Select an STA file or press Page # to navigate PAGE UP or PAGE DOWN to show the next
4 file slots.
4. Select LOAD.
5. Select YES to continue. Select NO to cancel.
5.1.3 Delete File
1. Navigate to the FILE MANAGER screen.
2. Select desired destination, INTERNAL FILE or EXTERNAL FILE (if USB is attached).
3. Select an STA, GIF, or CSV file or press Page # to navigate PAGE UP or PAGE DOWN to
show the next 4 file slots.
4. Select DELETE.
5. Select YES to continue. Select NO to cancel.
5.1.4 Copy File to I:/E:
1. Navigate to the FILE MANAGER screen.
2. Select desired destination, INTERNAL FILE or EXTERNAL FILE (if USB is attached).
3. Select an STA file or press Page # to navigate PAGE UP or PAGE DOWN to show the next
4 file slots.
4. Select COPY TO I:/E:. This will move the STA from internal to external memory or
external to internal memory.
5. Select YES to continue. Select NO to cancel.
5.1.5 Select
Use SELECT to copy multiple files at once from internal to external memory. Press SELECT again
on a file to deselect it.