User Manual

117
5 FILE MANAGER
The file manager menu is used to save and load parameter configuration files (.STA) set by the
user. These files can be saved to the internal (I) non-volatile memory or an external (E) USB
flash drive. Insert an empty USB flash drive to the front panel USB port and wait for the drive to
initialize (about five seconds).
To access the file manager menu:
1. Press the FILE button or select the DATA key that can be found on all display pages,
then select FILE.
2. Press <INTERNAL FILE> or <EXTERNAL FILE> to navigate between screens.
Figure 61 – File Manager
5.1 File Structure
The internal non-volatile memory can stored up to 30 STA files. The following folder structure is
automatically created on a USB flash drive when an external USB flash drive is connected.
Folder
Maximum Amount of File
Description
CSV
1
Measurement results, *.CSV file.
STA
40
Configuration data, *.STA file.
PIC
999
Screen capture, *.gif file.
Table 12 Folders Generated in USB
5.1.1 Saving Configuration Files
1. Navigate to the FILE MANAGER screen.
2. Select desired destination, INTERNAL FILE or EXTERNAL FILE (if USB is attached).
3. Select a file slot or press Page # to navigate PAGE UP or PAGE DOWN to show the next 4
file slots.