User Manual

Chapter 12
SYStem
12.1 SYSTem:BEEPer:STATe
Description The state of the beep feature
Command Syntax SYSTem:BEEPer:STATe <bool>
Parameters 1, on, 0, o
Example system:beeper:state o
ery Syntax SYSTem:BEEPer:STATe?
Returned Parameters 1 for on and 0 for o
12.2 SYSTem:LFRequency
Description The AC line frequency powering the meter. This helps reduce noise and
improve accuracy.
Command Syntax SYSTem:LFRequency <nr1>
Parameters 50 or 60 unit Hertz or cps
Example system:lfr 60
ery Syntax SYSTem:LFRequency?
Returned Parameters <nr1> 50 or 60
12.3 SYSTem:SAVE
Description Save the current configuration of the unit.
Command Syntax SYSTem:SAVE <nr1>,<str>
Parameters Table location, File name
Table location 1 through 30
File name 15 or fewer character without a file extension
Example syst:save 8,bkp
30