User Manual

CHAPTER 9. BIN 22
9.7 BIN:LOWer
Description The lower limit value of a particular BIN when in absolute tolerance mode.
Command Syntax BIN:UPPer <nr1>,<nr3>
Parameters <bin>,<resistance>
<bin> Bin number (0-9)
3
or (0-2)
4
<resistance> 0 to 2.2E+6, the lower limit resistance value in Ohms
Example bin:upper
ery Syntax BIN:UPPer?<nr1>
Returned Parameters <nr3>
9.8 BIN:REFerence
Description The nominal value for a particular BIN. The percentage (PTOLerance) uses
this.
Command Syntax BIN:REFerence <nr1>,<nr3>
Parameters <bin>,<tolerance>
<bin> Bin number (0-9)
5
or (0-2)
6
<resistance> 0 to 2.2E+6, the nominal resistance value
Example bin:ref 0,20E-3
ery Syntax BIN:REFerence?
Returned Parameters <nr3>
9.9 BIN:PERCent
Description The value tolerance for a particular bin nominal value
Command Syntax BIN:PERCent <nr1>,<nr3>
Parameters <bin>,<tolerance>
<bin> Bin number (0-9)
7
or (0-2)
8
<tolerance> 0 to 99.999, the percent tolerance
Example bin:perc 5
ery Syntax BIN:PERCent?
Returned Parameters <nr3>
3
2841
4
2840
5
2841
6
2840
7
2841
8
2840