User Manual

CHAPTER 7. TEMPERATURE 15
7.3 TEMPerature:CONVersion:DELTa:STATe
Description The state of the temperature conversion function. Sets the TC/∆t mode
to ∆t.
Command Syntax TEMPerature:CONVersion:DELTa:STATe <bool>
Parameters 1, on, 0, or o
Example temp:conv:delta:state on
ery Syntax TEMPerature:CONVersion:DELTa:STATe?
Returned Parameters <nr1> 1 for on, and 0 for o
7.4 TEMPerature:CONVersion:DELTa:PARameter
Description The “initial resistance” , “initial temperature” and “constant k” of the in-
strument temperature conversion function seings.
Command Syntax TEMPerature:CONVersion:DELTa:PARameter <nr3>,<nr2>,<nr2>
Parameters The parameters, in order:
Initial resistance 0 to 110.000E+6 units:Ω
Initial temperature -10.0 to 99.9 units:
◦
C
Constant -999.9 to 999.9 units:
◦
C
Example temp:con:delta:par 100,20,235
ery Syntax TEMPerature:CONversion:DELTa:PARameter?
Returned Parameters <nr3>,<nr2>,<nr1>
7.5 TEMPerature:SENSor
Description The type of temperature sensor connected.
Command Syntax TEMPerature:SENSor <str>
Parameters PT or ANALog
Example temp:sensor pt
ery Syntax TEMPerature:SENSor?
Returned Parameters <str> PT or ANAL
7.6 TEMPerature:PARameter
Description 2 points to use when the temperature sensor is an analog input to base
the voltage/temperature correction.
Command Syntax TEMPerature:PARameter <nr2>,<nr2>,<nr2>,<nr2>
Parameters In order <V1>,<T1>,<V2>,<T2>: