User Manual

82
To do manual cursor measurements, follow these steps:
1. Press CURSOR button to enter the cursor function menu.
2. Press the “Cursor Mode” option button to select “Manual”.
3. Press the “Type” option button to select “Voltage” or “Time”.
4. Press the “Source” option button to select “CH1”, “CH2”,
“MATH”, “REFA”, or “REFB” according to input signal
channel.
5. Select “Cur A”, turn the “Universal” knob to adjust Cursor A.
6. Select “Cur B”, turn the “Universal” knob to adjust Cursor B.
7. The measurement values are displayed on the top of the left
corner.
If the measurement type is set to “Voltage”, the values are as
followed:
 The voltage increment between Cursor A and Cursor
B: ΔV
 The value of Cur A: CurA
 The value of Cur B: Cur B
If the measurement type is set to “Time”, the values are as
followed:
 The time increment between Cursor A and Cursor B:
ΔT
 The reciprocal of time increment between Cursor A
and Cursor B: 1/ΔT
 The value of Cur A: CurA
 The value of Cur B: Cur B