User Manual

V/div

Adjusted

VOLTS/DIV adjustability

Coarse

Signal inverted

Off

Horizontal position

Center

Time/div

Adjusted

Trigger type

Edge

Trigger source

Auto detect the channel which has the

input signal

Trigger slope

Rising

Trigger mode

Auto

Trigger coupling

Trigger holdoff

Minimum

Trigger level

Set to 50%

NOTE: The AUTO button can be disabled. Please see “Education

Mode” for details.

3.4 Default Setup

The oscilloscope is set up for normal operation when it is shipped from the

factory. This is the default setup. To recall this setup, press the DEFAULT

SETUP button. For the default options, buttons and controls when you

press the DEFAULT SETUP button, refer to “Table 3.3 – Default Setup

Table” below.

The DEFAULT SETUP button does not reset the following settings: