User Manual

111
for remote communication
via SCPI.
Next Page
Page 2/4
Press this button to enter
third page.
Figure 3.54 – Utility Menu Screen 2
Table 3.52 – Utility System Menu 3
Option
Setting
Description
Update
firmware
Update the firmware of the
oscilloscope using a USB flash Drive.
Pass/Fail
Press this button to enter the “Pass/Fail
menu”.
Record
Press this button to enter the
waveform record menu.
IO Setting
Press this button to set the LAN IP and
GPIB settings. Use this for remote
communication via SCPI.
Next Page
Page 3/4
Press this button to enter fourth page.